ENGINEERING MECHANICS( PART ONE)


1.1 INTRODUCTION TO ENGINEERING MECHANICS

 What is engineering  mechanics? 

 Mechanics is defined  as  that branch  of applied science,  which describes  and  predicts  the  conditions  of rest  or motion of bodies  under  the  action of forces. 

 Engineering  mechanics   is the branch of engineering science that applies  the  principle  of Mechanics to plan, design  and  construct  various  types of structures  and  machines, taking into accounts the effects  of forces. 

 Engineering  mechanics  is  divided  into three  parts ( Mechanics of  rigid Bodies, Mechanics of deformable bodies  and Mechanics  of Fluids) 

Mechanics of rigid bodies is divided into two parts as “Statics” and “Dynamics”.

•Statics: The branch of mechanics that deals with bodies at rest or in motion but  at constant velocity

•Dynamics: The branch of Mechanics that deals with bodies in accelerated or decelerated motion.

Dynamics is also subdivided into two parts as Kinematics and Kinetics. Kinematics deals with the geometry of motion without taking into consideration of the loading that causes this motion i.e. without any reference to forces which are responsible for the motion. Kinetics deals with the body in motion considering the loads or forces that cause the motion.

In Mechanics of deformable bodies, the deformation gain importance in the analysis of the conditions of the motion or equilibrium of the body. 

Fluid mechanics: The science that deals with the behavior of fluids at rest (fluid statics)or in motion (fluid dynamics), and the interaction of fluids with solids or other fluids at the boundaries.

I hope you gain some knowledge after reading.

Please be motivate! 

You can also follow this series on my Facebook page: ESSENTIAL PRODUCTION ENGINEERING THEORIES -EPET

Comments